Dr. Vineet Srivastava

Associate Professor

Specialization

Advanced Machining Processes, Additive Manufacturing, Human Ergonomics

Email

vineet.srivastava@thapar.edu

Specialization

Advanced Machining Processes, Additive Manufacturing, Human Ergonomics

Email

vineet.srivastava@thapar.edu

Contact No.

+91-98880-31148, +91-62398-71878

Biography

Dr. Vineet Srivastava, PhD (IIT Delhi, India), ME (HBTI, Kanpur, India), BE (Visveswaraiah Technological University, Belgaum, India) and is presently an Associate Professor at Mechanical Engineering Department of Thapar Institute of Engineering & Technology (Deemed to be University), Patiala. He has previously worked as Assistant Professor at Thapar Institute of Engineering & Technology, Patiala, Punjab, SRM University, NCR Campus, Modinagar, Bharat Institute of Technology, Meerut & Pranveer Singh Institute of Technology, Kanpur. Also, he has worked as Research Associate in Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi.

He has published 15 International Journal papers, 17 conference papers and 06 book chapters. He has supervised more than 21 Master students and 1 PhD scholar in the areas of Additive Manufacturing, Electrical Discharge Machining, Tribological Studies, Metal Forming, Gait Analysis and industry related problems. Presently he is supervising 02 PhD scholars and 02 Master students in Additive Manufacturing, Modelling and Simulation and Gait Analysis. He has received several projects of worth Rs. 50 lakhs from different funding agencies. His research interests are Additive Manufacturing, Unconventional Machining, Modeling of Gait deformities, Design and Development of Medical Devices and Ultrasonic and coolant assistance in Machining Systems.

 

Academic Profile

  • Ph.D. in from Indian Institute of Technology, Delhi in Mechanical Engineering.
  • M.E. in Mechanical Engineering with specialization in CAD from Harcourt Butler Technological Institute, Kanpur affiliated with U.P. Technical University, Lucknow securing First Division with Honours.
  • B.E. in Mechanical Engineering from Visveswaraiah Technological University, Belgaum, Karnataka securing First Division with Distinction.

 

Teaching and Industrial Experience

  • Associate Professor, Thapar Institute of Engineering & Technology, Patiala, India
    • July 2022-Contd
  • Assistant Professor, Thapar Institute of Engineering & Technology, Patiala, India
    • July 2014 – June 2022
  • Assistant Professor, SRM University, NCR Campus, Modinagar, India
    • February 2014- July 2014
  • Assistant Professor, Bharat Institute of Technology, Meerut, India
    • October 2012- January 2014
  • Research Associate, Indian Institute of Technology Delhi, New Delhi, India
    • December 2008- May 2012
  • Senior Lecturer, Pranveer Singh Institute of Technology, Kanpur, India
    • July 2008- November 2008
  • Lecturer, Pranveer Singh Institute of Technology, Kanpur, India
    • August 2005- June 2008

 

Research Interests

  • Additive Manufacturing
  • Unconventional Machining
  • Modeling of Gait deformities
  • Design and Development of Medical Devices
  • Ultrasonic and coolant assistance in Machining Systems

 

Research Projects

Year of Funding

Sponsoring Organisation

Title of Project

Amount of Grant (in Lakhs)

Co-Investigators (if any)

2022-2023

Dassault Systèmes Foundation

Parametric Design of 3D Insole considering Orthopaedic Deformities based on Plantar Pressure and 3D Geometry of the Human Feet.

22.15

Dr. Vineet Srivastava (PI),

Dr. R.K. Duvedi

(Co-PI)

2022-2024

ICMR

Development of Cross-contamination-free portable suction assembly for airways clearance in mechanically ventilated patients.

23.22

Dr. Diptiman Choudhary (PI), Dr. Vineet Srivastava (Co-PI), Dr. R.K. Duvedi (Co-PI), Dr. Babita Ghai (Co-PI)

2015-2017

Thapar Institute of Engineering & Technology

Improvement of part quality by controlling shrinkage and surface roughness in 3D Printing.

5

Dr. Vineet Srivastava (PI)

 

Membership of Professional Institutions, Associations, Societies

  • Life member of Additive Manufacturing Society of India (AMSI) (AM 201/15)
  • Member of The American Society of Mechanical Engineers (ASME) (Membership No.: 103690973)

Publications in Peer Reviewed International Journals (15)

  • Arminder Singh Walia, Vineet Srivastava, Karun Verma, “Modelling of Surface Roughness and Change in Out‐of‐Roundness of Tool during Electrical Discharge Machining with Cermet Tool Tip Using Machine Learning”, Processes, 10, 252, 2022.
  • Arminder Singh Walia, Vineet Srivastava, Prashant S Rana, Nalin Somani, N.K. Gupta, Gurminder Singh, D.Y. Pimenov, Tadeusz Mikolajczyk, Navneet Khanna, “Prediction of Tool Shape in Electrical Discharge Machining of EN31 Steel Using Machine Learning Techniques”, Metals, 11, 1668, 2021.
  • Arminder Singh Walia, Vineet Srivastava, Mayank Garg, Nalin Somani, Nitin Kumar Gupta, Chander Prakash, Cherry Bhargava, Ketan Kotecha, “Surface Roughness Analysis of H13 Steel during Electrical Discharge Machining Process Using Cu–TiC Sintered Electrode”, Materials, 14, 5943, 2021.
  • Kamalpreet Sandhu, Vineet Srivastava, Madhusudan Pal, “Effect of shod walking on plantar pressure with varying insole”, Defence Life Science Journal, 5(4), 248-254, 2020.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, “Impact of copper titanium carbide tooltip on machined surface integrity during Electrical Discharge Machining of EN31 steel”, Material Research Express, 6(10), 6582, 2019.
  • Arminder Singh Walia, Vivek Jain, Vineet Srivastava, “Development and performance evaluation of sintered tool tip while EDMing of hardened steel”, Material Research Express, 6(08), 6520, 2019
  • Nalin Somani ,Y.K. Tyagi, Parveen Kumar, Vineet Srivastava, Hiralal Bhowmick, “Enhanced Tribological properties of SiC reinforced copper metal matrix composites”, Materials Research Express, 6(01), 6549, 2019.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, “Fabrication and Application of Composite Electrodes in Electrical Discharge Machining-A Review”, International Journal of Computer Applications, ICAET 2017 (4) 1-5, 2018
  • Vineet Srivastava, Pulak M. Pandey, “Statistical modeling and material removal mechanism of electrical discharge machining process with cryogenically cooled electrode”, Procedia Materials Science, 5, 2003-2014, 2014.
  • Vineet Srivastava, Pulak M. Pandey, “Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu- TiC) tooltip”, Journal of Manufacturing Processes, 15, 158-166, 2013.
  • Vineet Srivastava, Pulak M. Pandey, “Experimental Investigation on EDM process with ultrasonic assisted cryogenically cooled electrode”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(2) 301– 314, 2013.
  • Vineet Srivastava, Pulak M. Pandey, “Effect of process parameters on the performances of EDM process with ultrasonic assisted cryogenically cooled electrode”, Journal of Manufacturing Processes, 14, 393–402, 2012.
  • Vineet Srivastava, Pulak M. Pandey, “Performance evaluation of EDM process using cryogenically cooled electrode”, Material and Manufacturing Processes, 27(6), 683-688, 2012.
  • Rahul S. Mulik, Vineet Srivastava, Pulak M. Pandey, “Experimental Investigations and Modeling of Temperature in the Work-Brush Interface during Ultrasonic Assisted Magnetic Abrasive Finishing Process”, Material and Manufacturing Processes, 27(1), 1-9, 2012.
  • Vineet Srivastava, Pulak M. Pandey, “Study of the Cryogenically Cooled Electrode Shape in Electric Discharge Machining Process”, International Journal of Mechanical and Mechatronics Engineering, 5(12), 2616-2620, 2011
  •  

Conference Papers (17)

  • Shakti Shekhar Puri, Faheem Faroze, Sourabh Sharma, Vineet Srivastava, Arun Tom Mathew, “Modelling of Volumetric Shrinkage of Nylon parts fabricated by 3D printing process”, Second International Conference on Future Technologies (ICOFT 2021) in Manufacturing, Automation, Design and Energy, NIT Puducherry, Puducherry, India, 2021.
  • Mayank Garg, Arminder Singh Walia, Vineet Srivastava, “Modelling and Analysis of Surface Roughness of H13 tool steel during Electrical Discharge Machining process using sintered tool tip”, International Conference on Industrial and Manufacturing Systems (CIMS-2020), Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India, 2020.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, “Application of Machine Learning Techniques to predict the Surface Roughness in Electrical Discharge Machining of Hardened EN31 steel with cermet tool tip”, 40th MATADOR International Conference on Advanced Manufacturing and Design, Hangzhou, China, 2019.
  • Jonty Mago, Rajat Kumar, Raj Agrawal, Anoop Singh, Vineet Srivastava, “Modeling of Linear Shrinkage in PLA Parts Fabricated by 3D Printing using TOPSIS Method”, 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018), College of Engineering Guindy, Chennai, India, 2018.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, Mayank Garg, “Modelling and Analysis of Change in Shape of sintered Cu-TiC tool tip during Electrical Discharge Machining process”, 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018), College of Engineering Guindy, Chennai, India, 2018.
  • Kamalpreet Sandhu, Vineet Srivastava, Madhusudhan Pal, “A review of force measurement methodologies used in smart insole system during gait analysis”, FIPSPHYSIOCON 2017, Vallabhbhai Patel Chest Institute (VPCI), University of Delhi, New Delhi, India, 2017.
  • S. Singh, R. Rajpoot, V. Bedi, S. Vats, Vineet Srivastava, “Effect of Process Parameters on Shrinkage of Acrylonitrile Butadiene Styrene Parts Fabricated by 3D Printing Process”, PHENMA 2017, PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, India, 2017.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, “Study of tool shape during the Electrical Discharge Machining of AISI52100 steel using Copper-Titanium Carbide tooltip”, International Conference on Advances in Materials & Processing Technologies (AMPT‐2017), VIT Chennai, India, 2017.
  • Arminder Singh Walia, Vineet Srivastava, Vivek Jain, “Fabrication and Application of Composite Electrodes in Electrical Discharge Machining-A Review”, 5th International Conference on Advancements in Engineering and Technology (ICAET-2017), Sangrur, India, 2017.
  • Jagdish Khatwani, Vineet Srivastava, “Effect of process parameters on mechanical properties of solidified PLA parts fabricated by 3D Printing process”, 6th International Conference & Exhibition on Additive Manufacturing Technologies - AM 2016., Bengaluru, India, 2016.
  • Pankaj Singla, Vineet Srivastava, “Effect of process parameters on surface roughness in 3D Printing process for ABS parts”, National Conference on Advances in Material Design and Manufacturing (AMDM-2016), Kanpur, India, 2016.
  • Shekhar Saini, Vineet Srivastava, Gurpreet Singh Saini, “Effect of process parameters on shrinkage for solidified Polylactic Acid parts in 3D Printing process”, National Conference on Advances in Material Design and Manufacturing (AMDM-2016), Kanpur, India, 2016.
  • Vineet Srivastava, Pulak M. Pandey, “Modeling and material removal mechanism of EDM process with cryogenically cooled electrode”, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), NIT Karnataka, Surathkal, India, 2014.
  • Vineet Srivastava, “A review on environmentally friendly dielectric fluids in electrical discharge machining”, National Seminar on Recent Advances in Pollution and Abetment (RAPA-2014), Meerut, India, 2014
  • Vineet Srivastava, Pulak M. Pandey, “Study of the Cryogenically Cooled Electrode Shape in Electric Discharge Machining Process”, ICETM 2011: International Conference on Engineering and Technology Management, Phuket, Thailand, 2011
  • Vineet Srivastava, S.K. Parida, Pulak M. Pandey, “Surface Roughness studies in Selective Laser Sintering of Glass filled Polyamide”, 36th International MATADOR Conference, Manchester, Lancashire, United Kingdom, 2010.
  • Vineet Srivastava, Pulak M. Pandey, Naresh Bhatnagar, “Selective Laser Sintering of Carbon fiber-Reinforced Polyamide”, National Conference on Advanced Manufacturing Techniques (NCAMT-2009), Jammu, India, 2009.

Publication of Book Chapters (6)

  • “Effect of Process Parameters on Shrinkage of Acrylonitrile Butadiene Styrene Parts Fabricated by 3D Printing Process”, by S. Singh, R. Rajpoot, V. Bedi, S. Vats, Vineet Srivastava, in the book “Advanced Materials”, 2018, Springer.
  • “Effect of Process Parameters on Mechanical Properties of Solidified PLA Parts Fabricated by 3D Print”, in the book “3D Printing and Additive Manufacturing Technologies” by Jagdish Khatwani, Vineet Srivastava, 2019, Springer.
  • “Modelling and Analysis of Change in Shape of sintered Cu-TiC tool tip during Electrical Discharge Machining process” in the book “Advances in Unconventional Machining and Composites” by Arminder Singh Walia, Vineet Srivastava, Vivek Jain, Mayank Garg, 2020, Springer.
  • “Modeling of Linear Shrinkage in PLA Parts Fabricated by 3D Printing Using TOPSIS Method” in the book “Advances in Additive Manufacturing and Joining” by Jonty Mago, Rajat Kumar, Raj Agrawal, Anoop Singh, Vineet Srivastava, 2020, Springer.
  • “Effect of TiC Reinforcement in the Copper Tool on Roundness During EDM Process” in the book “Advances in Materials Science and Engineering” by Arminder Singh Walia, Vineet Srivastava, Vivek Jain, Suneev Anil Bansal, 2020, Springer.
  • “Material and Tool Fabrication Techniques for Electrical Discharge Machining Process” in the book “Advances in Nonconventional Machining Processes” by Arminder Singh Walia, Vineet Srivastava, Vivek Jain, Amit Handa, 2020, Bentham Science Publications.

 

Courses of Interest

  • Additive Manufacturing
  • Manufacturing Technology
  • Machining Science
  • Innovation and Entrepreneurship
  • Facility Planning
  • Rapid Prototyping and Tooling
  • Applied Optimization in Engineering Design

 

PhD Thesis Guided

Sl. No.

Title of the Thesis

Name of the Supervisor(s)

Student Name

Year

Status

1

Experimental Investigations and Analysis of Electrical Discharge Machining of Hardened EN31 Steel using Cermet Tool Tip

Dr. Vineet Srivastava & Dr. Vivek Jain

Dr. Arminder Singh Walia

2020

Awarded

2

Experimental Investigations related to Part Strength And Shape Realizability in Fused Filament Fabrication (FFF) Process

Dr. Vineet Srivastava & Dr. Ajay Batish

Mr. Faheem Faroze

-

IRB done

3

Modelling And Simulation of Heat Transfer Coefficient in Multiple Effect Evaporator undergoing Fouling

Dr. Anoop Kumar & Dr. Vineet Srivastava

Mr. Gursimranjot Singh Mavi

-

IRB done

 

ME Thesis Guided

21 (Twenty One)

 

Professional Responsibilities

Sl. No.

Work

Duration

Institute/Organization

1.

Coordinator, Center of Excellence for Advanced Manufacturing

May, 2022 till date

TIET, Patiala, Punjab

2.

Vice President, Entrepreneurship Development Cell

March, 2022 till date

TIET, Patiala, Punjab

3.

Vice President, Institute Innovation Council

June, 2022 till date

TIET, Patiala, Punjab

4.

Member, Thapar Satellite Project (ThaparSat)

January, 2020 till date

TIET, Patiala, Punjab

5.

Coordinator, Startup Semester

January, 2022 till date

TIET, Patiala, Punjab

6.

Member, Venture Lab, TIET

June, 2016 till date

TIET, Patiala, Punjab

7.

In-charge, Fabrication Lab, Venture Lab, TIET

June, 2016 till date

TIET, Patiala, Punjab

8.

In-charge, Additive Manufacturing Lab, MED, TIET

September, 2016 till date

TIET, Patiala, Punjab

9.

In charge, Departmental Library, MED, TIET

October, 2014 till date

TIET, Patiala, Punjab

10.

Coordinator, ISO, MED, TIET

February, 2017 till

July, 2023

TIET, Patiala, Punjab

11.

Coordinator, Innovation and Entrepreneurship Course

January, 2017 till

July, 2020

TIET, Patiala, Punjab

12.

Coordinator, Souvenir, MED, TIET

October, 2014 till

July, 2021

TIET, Patiala, Punjab

13.

Member-Secretary, DPPC, MED

August, 2018 till

June, 2019

TIET, Patiala, Punjab

 

Foreign Visits

S. No.

Country

University/Organisation

Year

Purpose

1.

Israel

Tel Aviv University & Israel Institute of Metals, Technion Campus, Haifa

2022

For discussions regarding Center of Excellence for Advanced Manufacturing

2.

The Netherlands

University of Groningen & University of Twente

2016

for "EEEE" program of TIET

3.

Thailand

Phuket Rajabhat University

2011

To present a paper

 

Awards and Honours

  • Awarded Research Associate (R.A.) scholarship from CSIR, New Delhi and DST, New Delhi.
  • Chaired a technical session in AMME 2014: International Conference on Advances in Manufacturing and Materials Engineering, NITK Surathkal, India, March 27-29 (2014).
  • Secured IST position in M.Tech.
  • Secured IIIrd position in college in B.E.
Download Brochure