Publications

SCI Papers

Conference Papers

SCI Papers with High Impact Factor

 

S.No

Paper

I.F.

  1.  

Rosha, Pali, Amit Dhir, and Saroj Kumar Mohapatra. "Influence of gaseous fuel induction on the various engine characteristics of a dual fuel compression ignition engine: a review." Renewable and Sustainable Energy Reviews 82 (2018): 3333-3349.

9.184

  1.  

Nanda, Tarun, Karanbir Singh, Daksh Shelly, and Rajeev Mehta. "Advancements in multi-scale filler reinforced epoxy nanocomposites for improved impact strength: A review." Critical Reviews in Solid State and Materials Sciences (2020): 1-49.

8.344

  1.  

Singh, Karanbir, Tarun Nanda, and Rajeev Mehta. "Addition of nanoclay and compatibilized EPDM rubber for improved impact strength of epoxy glass fiber composites." Composites Part A: Applied Science and Manufacturing 103 (2017): 263-271.

6.282

  1.  

Singh, Karanbir, Tarun Nanda, and Rajeev Mehta. "Compatibilization of polypropylene fibers in epoxy based GFRP/clay nanocomposites for improved impact strength." Composites Part A: Applied Science and Manufacturing 98 (2017): 207-217.

6.282

  1.  

Yadav, Ravi Datt, and Anant Kumar Singh. "A novel magnetorheological gear profile finishing with high shape accuracy." International Journal of Machine Tools and Manufacture 139 (2019): 75-92.

6.093

  1.  

Sharma, Sandeep Kumar, Ravinder Kumar Duvedi, Sanjeev Bedi, and Stephen Mann. "A multipoint tool positioning method for five-axis machining in the region of two intersecting tensor product Bézier surfaces." International Journal of Machine Tools and Manufacture 142 (2019): 42-53.

6.039

  1.  

Bhalla, Vishal, Vikrant Khullar, and Himanshu Tyagi. "Experimental investigation of photo-thermal analysis of blended nanoparticles (Al2O3/Co3O4) for direct absorption solar thermal collector." Renewable Energy 123 (2018): 616-626.

5.439

  1.  

Garg, Kapil, Vikrant Khullar, Sarit K. Das, and Himanshu Tyagi. "Performance evaluation of a brine-recirculation multistage flash desalination system coupled with nanofluid-based direct absorption solar collector." Renewable Energy 122 (2018): 140-151.

5.439

  1.  

Bhalla, Vishal, Sachin Beejawat, Jay Doshi, Vikrant Khullar, Harjit Singh, and Himanshu Tyagi. "Silicone oil envelope for enhancing the performance of nanofluid-based direct absorption solar collectors." Renewable Energy 145 (2020): 2733-2740.

5.439

  1.  

Sharma, Vipin Kumar, Vinod Kumar, and Ravinder Singh Joshi. "Parametric study of aluminium-rare earth based composites with improved hydrophobicity using response surface method." Journal of Materials Research and Technology 9, no. 3 (2020): 4919-4932.

5.289

  1.  

Sharma, Ashutosh, Shruti Sharma, Sandeep Sharma, and Abhijit Mukherjee. "Monitoring invisible corrosion in concrete using a combination of wave propagation techniques." Cement and Concrete Composites 90 (2018): 89-99.

5.172

  1.  

Singh, S. K., I. V. Singh, B. K. Mishra, and G. Bhardwaj. "Analysis of cracked functionally graded material plates using XIGA based on generalized higher-order shear deformation theory." Composite Structures 225 (2019): 111038.

4.829

  1.  

Soni, Aakash, Neeraj Grover, Gagandeep Bhardwaj, and B. N. Singh. "Non-polynomial framework for static analysis of functionally graded carbon nano-tube reinforced plates." Composite Structures 233 (2020): 111569.

4.829

  1.  

Singh, Daljeet, Rahul Upadhyay, Husanbir Singh Pannu, and Dimitri Leray. "Development of an adaptive neuro fuzzy inference system based vehicular traffic noise prediction model." Journal of Ambient Intelligence and Humanized Computing (2020): 1-17.

4.594

  1.  

Singh, Nirmal, and Vikrant Khullar. "Efficient Volumetric Absorption Solar Thermal Platforms Employing Thermally Stable-Solar Selective Nanofluids Engineered from Used Engine Oil." Scientific reports 9, no. 1 (2019): 1-12.

4.525

  1.  

Rosha, Pali, Saroj Kumar Mohapatra, Sunil Kumar Mahla, and Amit Dhir. "Hydrogen enrichment of biogas via dry and autothermal-dry reforming with pure nickel (Ni) nanoparticle." Energy 172 (2019): 733-739.

4.39

  1.  

Rosha, Pali, Saroj Kumar Mohapatra, Sunil Kumar Mahla, HaengMuk Cho, Bhupendra Singh Chauhan, and Amit Dhir. "Effect of compression ratio on combustion, performance, and emission characteristics of compression ignition engine fueled with palm (B20) biodiesel blend." Energy 178 (2019): 676-684.

4.39

  1.  

Singh, Gurmeet, Neeraj Kumar, and Pramod Kumar Avti. "Computational evaluation of effectiveness for intratumoral injection strategies in magnetic nanoparticle assisted thermotherapy." International Journal of Heat and Mass Transfer 148 (2020): 119129.

4.346

  1.  

Rosha, Pali, Saroj Kumar Mohapatra, Sunil Kumar Mahla, and Amit Dhir. "Biogas reforming for hydrogen enrichment by ceria decorated over nickel catalyst supported on titania and alumina." International Journal of Hydrogen Energy 43, no. 46 (2018): 21246-21255.

4.229

  1.  

Singh, Sarvjeet, and Rohit Kumar Singla. "Experimental and numerical analysis of a nonlinear pin fin with temperature dependent properties and disparate boundary conditions." International Communications in Heat and Mass Transfer 108 (2019): 104313.

4.127

  1.  

Kataria, Jatinder, S. K. Mohapatra, and K. Kundu. "Biodiesel production from waste cooking oil using heterogeneous catalysts and its operational characteristics on variable compression ratio CI engine." Journal of the Energy Institute 92, no. 2 (2019): 275-287.

4.217

  1.  

Singh, Harmanpreet, and S. K. Mohapatra. "Production of producer gas from sugarcane bagasse and carpentry waste and its sustainable use in a dual fuel CI engine: A performance, emission, and noise investigation." Journal of the Energy Institute 91, no. 1 (2018): 43-54.

4.217

  1.  

Grover, Vishwas, and Anant Kumar Singh. "Modelling of surface roughness in a new magnetorheological honing process for internal finishing of cylindrical workpieces." International Journal of Mechanical Sciences 144 (2018): 679-695.

4.134

  1.  

Yadav, Ravi Datt, Anant Kumar Singh, and Kunal Arora. "Parametric analysis of magnetorheological finishing process for improved performance of gear profile." Journal of Manufacturing Processes 57 (2020): 254-267.

4.086

  1.  

Singh, Manpreet, and Anant Kumar Singh. "Magnetorheological finishing of variable diametric external surface of the tapered cylindrical workpieces for functionality improvement." Journal of Manufacturing Processes 61 (2021): 153-172.

4.086

  1.  

Sharma, Ashutosh, Shruti Sharma, Sandeep Sharma, and Abhijit Mukherjee. "Investigation of deterioration in corroding reinforced concrete beams using active and passive techniques." Construction and Building Materials 161 (2018): 555-569.

4.046

  1.  

Bhalla, Nikita, Sandeep Sharma, Shruti Sharma, and Rafat Siddique. "Monitoring early-age setting of silica fume concrete using wave propagation techniques." Construction and Building Materials 162 (2018): 802-815.

4.046

  1.  

Singhal, Meenal, Sarvjeet Singh, Rohit Kumar Singla, Kavita Goyal, and Deepak Jain. "Experimental and computational inverse thermal analysis of transient, non-linear heat flux in circular pin fin with temperature-dependent thermal properties." Applied Thermal Engineering 168 (2020): 114721.

4.026